Metabo HC 410 - Manual (Page 16)

Contents
10 Dangerous Operations
11 Push Blocks
12 Controls
13 Operation
14 Daily Safety Checks
15 Replacing/Setting the Planer Blades
16 Care and Maintenance
1 Specifications
2 User Responsibility
3 Standard Delivery
4 Optional Accessories
5 Scope of Application
6 Transportation
7 Installation/Initial Operation
8 Safety
9 Workpiece Dimensions
3 Standard Delivery
- Cutter guard with 410 mm cover
- 3 reversible planing blades, installed in
cutterblock
- 4 adjustable feet, installed
- Dust collection chute, installed
- With 230 1-ph/400 V 16 A 3-ph plug
- Canting fence, disassembled
- Tool set
- Instructions
- Lifting eyes
1 Specifications HC 410 D
Stock-no.: 011 304 1013
Planing bed overall length: 1700 mm
Max. planing width: 410 mm
Depth of cut, planing: 0-5 mm
Fence tilt: 90
°-45°
Length thicknessing bed: 670 mm
Thicknesser capacity - width: 405 mm
Thicknesser capacity - height: 230 mm
Max. depth of cut, thicknessing: 5 mm
Thicknesser feed rate: 7 m/min
Cutterblock speed: 5500 rpm
No. of planer blades: 33
Motor capacity P
1
: 5.5 kW
Voltage, motor: 3~ 400 VAC 50 Hz
Voltage, control circuit: 230 VAC
Input capacity: 7.0 kVA
Mains fuse: 3x16 A time-lag
Weight: 275 kg
Floor space required, approx.: 1740 x 800 mm
Working height, planing: 900 mm
Workplace related noise emission values L
P
according to DIN 45635, part 1651, idling:
Required vaccuum at dust collection port: 900 Pa.
Planing:
84,0 dB(A)
Thicknessing: 87,3 dB(A)
ENG
2 User Responsibility
This machine will perform in conformity with the description contained in the instructions provided. This machine
must be checked periodically. Defective equipment (including power cable) should not be used. Parts that are
broken, missing, plainly worn, distorted or contaminated, should be replaced immediately. Should such repair
or replacement become necessary, it is recommended that such repairs are carried out by qualified persons
approved by metabo or its authorized representatives.
This machine or any of its parts should not be altered or changed from standard specifications. The user of this
machine shall have the sole responsibility for any malfunction which results from improper use or unauthorized
modification from standard specifications, faulty maintenance, damage or improper repair by anyone other than
qualified persons approved by metabo or its authorized representatives.
metabo reserves the right to change specifications and design without prior notice and without incurring
obligation of any kind. Equipment referred to as available or optional may be at extra cost.