Multi-Tech Systems MTA128NT - Manual (Page 30)

AT Commands, S-Registers, and Result Codes
MTA128ST/NT 30
S63 Bandwidth-On-Demand (BOD) Low Throughput Threshold
S64 Call Bumping (CB)
S65 POTS Call Bump Forwarding Delay
S66 Country Selections for POTS Ring Signal
S67 Single or Dual Cadence POTS Ring Signal
S68 POTS Ring Signal First Active Duration
S69 POTS Ring Signal First Idle Duration
S70 POTS Ring Signal Second Active Duration
S71 POTS Ring Signal Second Idle Duration
S73 MultiLink Endpoint Discriminator Type
S74 Maximum CLEAR Buffer Size
S75 Maximum V.110 Buffer Size* (ST only)
S76 V.110 Network Rate* (ST only)
S77 V.110 Network Rate Control* (ST only)
S80 Persistent DTR Dialing Delay
S81 Link Setup Timeout
S82 Delay Before Trying V.110*
S84 Data to Terminal Delay
S85 Data to B-channel Delay
S86 V.110 T1 Time-out*
S87 INS64 Analog Call Origination Delay
S154 B-Channel Answer Rate
* Note: V.110 is supported by some MTA128ST models only.