MicroNet Technology SP766W - Manual (Page 111)

103
9.4 Modify Setting Values – “set” Command
“set” command is used to modify the setting values of this print server.
The format of “set” command is as following:
set argument_name value
Then the value will be written into the system configuration. For example,
if you want to set IP address of the print server to 192.168.2.2, type “set
ip ‘192.168.2.2’” command and the IP of the print server will be changed:
admin# set ip ’192.168.2.2’
If you enter only “set”, the system will list all arguments of “set” command
and the command format.
The following table lists all the arguments whose value can be modified by
“set” command:
Argument Description Example
psname Print server name set psname ‘PS001’
password Login password set password ‘1234’
username Login username set username ‘admin’
wlfunc Enable or disable the
wireless LAN function.
The value should be
“disabled”, “enabled” or
“auto”
set wlfunc auto
wlmode Wireless LAN mode is
Infrastructure or Ad Hoc.
The value should be “inf” or
“ad hoc”
set wlmode ad hoc
ESSID ESSID of the wireless LAN set ESSID default
Argument Description Example
channel Channel number used by
wireless LAN.
The value should be 1~14.
set channel 11