Memorex MVDT2002A - Manual (Page 22)

22
Memorizing channels
This unit is equipped with a channel memory feature which allows channels to skip up or down to the
next channel set into memory, skipping over unwanted channels. Before selecting channels, they must
be programmed into the unit’s memory. In addition to normal VHF and UHF channels, this unit can
receive up to 113 Cable TV channels. To use this unit with an antenna, set the TV/CABLE menu option
to the TV mode. When shipped from the factory, this menu option is in the CABLE mode.
TV/CABLE selection
1
Press SETUP/TV MENU in the TV/VCR mode.
The TV/VCR menu screen will appear.
2
Press or to select CH
option.
3
Press or to select “TV/
CABLE”.
4
Press or to select “TV” or
“CABLE”.
5
Press SETUP/TV MENU until the menu screen is cleared.
Cable TV chart
The chart below is typical of many Cable TV system channel
allocations.
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/ / / / MENU
CABLE
CH
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
TV
CH
/ / / / MENU
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
CABLE
CH
/ / / / MENU
TV - VHF/UHF channels
CABLE - Cable TV channels
5V40401A [En]22-25 2/3/06, 5:59 PM 22