MABIS/Duro-Med 04-255-001 - Manual (Page 20)

18
3. The cuff will quickly inflate to the preset
level, Fig. 2, and will get tighter around your
wrist. If the cuff becomes too tight, press the
POWER button and rewrap the cuff leaving
a little more room between the cuff and your
wrist. You can stop the measurement/inflation at
any time by pressing the POWER button.
4. The heart symbol on the display will flash
while the cuff pressure decreases, Fig. 3. Do not
be alarmed by the changing numbers or if the
numbers appear to be higher than your normal
pressure.
5. When the measurement is complete, the cuff will automatically
deflate releasing the cuff’s air pressure. Your monitor features
“quick exhaust” for added comfort.
6 . The display will show your blood pressure
(Systolic and Diastolic) measurements and pulse
rate, Fig. 4.
7. Your reading will automatically store into
the bank that was selected prior to starting the measurement.
Press the POWER button to turn the unit off. Otherwise the unit
will automatically turn off in approximately 30 seconds.
AUTOMATIC REPRESSURIZATION
If the pressure is insufficient during the early phase of meas-
urement or if movement is detected, the unit will re-inflate to
a level approximately 30mmHg higher than the preset.
Repressurization is not always an indication of a problem
and may be repeated.
Fig. 2
Fig. 3.
Fig. 4.