Miele DA239-3 - Manual (Page 34)

^ Secure the chimney to the motor
assembly and lower retaining plate
with the remaining screws.
^ Remove the grease filters.
^ Adjust the angle of the canopy by
tightening the screw located on its
interior. Turn the screw clockwise to
raise the canopy and
counter-clockwise to lower it. Tighten
as much as necessary to level the
front of the canopy.
^ Return the grease filters.
^ Before using the appliance remove
the grease filter and remove the
protective foil from the filter frame.
Return the filter.
Installation
34