Miele DA239-3 - Manual (Page 31)

Attaching the canopy
^ Hang the canopy from the motor
assembly by placing the holes at the
rear over the hooks on the lower
edge of the assembly. Be careful not
to pinch any wires.
^ Secure the canopy by guiding the 2
remaining screws through the locking
plate and the holes in the motor
assembly (see illustration). Tighten
the screws.
Connecting the exhaust duct
^ Connect the ductwork to the exhaust
connection using appropriate
measures for the type of ductwork
being installed (hose clamp, duct
tape, etc.).
^ Direct the duct through the back wall
or the ceiling.
Installation
31