Rsr sr c c sw sw sbr sbr sl sl sbl sbl l l, Digital in, Input 2 – Marantz SR4003 User Manual
Page 15: Monitor, Monitor out out input input 3 3
11
ENGLISH
BASIC
CONNECTIONS
BASIC OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTIONS
BASIC
CONNECTIONS
CONNECTING AUDIO COMPONENTS
The output audio signal from the TAPE OUT jack and
the CD/CD-R OUT jack is the same signal which is
currently selected.
Caution:
Do not connect this unit and other components to mains
power until all connections between components have
been completed.
Notes:
• Insert all plugs and connectors securely. Incomplete
connections may make noise.
• Be sure to connect the left and right channels
properly.
Red connectors are for the R (right) channel, and
white connectors are for the L (left) channel.
• Be sure to connect input and output properly.
• Refer to the instructions for each component that is
connected to this unit.
• Do not bind audio/video connection cables with
power cords and speaker cables this will result in
generating a hum or other noise.
CONNECTING DIGITAL AUDIO COMPONENTS
• There are 4 digital inputs, 2 coaxial jacks and
2 optical jacks, on the rear panel. You can use
these jacks to input PCM, Dolby Digital and DTS
bitstream signals from a CD, DVD, or other digital
source components.
• There is one optical output jack on the rear panel.
These jacks can be connected to a CD recorder,
or a MD deck inputs, respectively.
• Refer to the instructions for each component. To
setup the digital audio format of DVD player, or
other digital source’s connected to digital input
jacks.
• Use
fi ber optical cables (optical) for DIG-1,2, input
jacks. Use 75 ohms coaxial cables (for digital audio
or video) for DIG-3,4, input jacks.
• You can designate the input for each digital input/
output jacks according to your component. See
page 21.
Notes:
• There is no Dolby Digital RF input jack. Please use
an external RF demodulator Dolby Digital decoder
when connecting the Dolby Digital RF output jack
of the video disc player to the digital input jack.
• The digital signal jacks on this unit conform to
the EIA standard. If you use a cable that does not
conform to this standard, this unit may not function
properly.
• Each type of audio jack works independently.
Signals input through the digital and analog jacks are
output through the corresponding digital and analog
jacks, respectively.
R
R
SR
SR
C
C
SW
SW
SBR
SBR
SL
SL
SBL
SBL
L
L
R
R
SPEAKER SYSTEMS : 6-8 OHMS
SPEAKER SYSTEMS : 6-8 OHMS
R
R
L
L
L
L
L
L
R
R
IN
IN
OPT
OPT
DIGITAL OUT
DIGITAL OUT
L
L
SL
SL
C
C
SBL
SBL
R
R
SR
SR
SW
SW
SBR
SBR
R
R
L
L
FM
FM (
(75
75
Ω
Ω))
GND
GND
AM
AM
C
CR
R
//P
PR
R
C
CB
B
//P
PB
B
Y
Y
ANTENNA
ANTENNA
DIGITAL IN
DIGITAL IN
OUT
OUT
IN
IN
CD/CDR
CD/CDR
OUT
OUT
IN
IN
TAPE
TAPE
VCR
VCR
DVD
DVD
TV
TV
AUDIO
AUDIO
DSS
DSS
IN
IN
OUT
OUT
C
CR
R
//P
PR
R
C
CB
B
//P
PB
B
Y
Y
DSS
DSS
TV
TV
DVD
DVD
VCR IN
VCR IN
VCR OUT
VCR OUT
MONITOR OUT
MONITOR OUT
INPUT
INPUT
1
1
INPUT
INPUT
2
2
S-VIDEO
S-VIDEO
VIDEO
VIDEO
PRE OUT
PRE OUT
AC OUTLET
AC OUTLET
230V 50/60Hz
230V 50/60Hz
SWITCHED
SWITCHED
0.65A 150W
0.65A 150W
INPUT 2
INPUT 2
OUTPUT
OUTPUT
INPUT 1
INPUT 1
CENTER
CENTER
FRONT
FRONT
SURROUND BACK
SURROUND BACK
S. SPEAKER B
S. SPEAKER B
SURROUND
SURROUND
AC IN
AC IN
MONITOR
MONITOR
OUT
OUT
INPUT
INPUT
3
3
COMPONENT
COMPONENT
VIDEO
VIDEO
OUT
OUT
REMOTE CONT.
REMOTE CONT.
2
2
1
1
4
4
3
3
7.1CH INPUT
7.1CH INPUT
(
(AUX 2
AUX 2)
)
MODEL NO. SR4003
MODEL NO. SR4003
OPT
OPT
DIGITAL OUT
DIGITAL OUT
DIGITAL IN
DIGITAL IN
OUT
OUT
IN
IN
CD/CDR
CD/CDR
OUT
OUT
IN
IN
TAPE
TAPE
4
4
3
3
OUT IN
L
R
L
R
L R
L R
R L
R
L
OUT IN
L
R
L
R
DIGITAL
INPUT
DIGITAL
OUTPUT
DIGITAL
OUTPUT
R L
R L
R L
R
L
L
R
CD recorder
CD player
Tape Deck
Analog Audio
Digital Audio (coaxial)
Digital Audio (optical)