Only), Lighting submenu, Or off (usa only) – Mercedes-Benz 2011 SL-Class User Manual
Page 126: Setting standard display, Controls in detail, Control system

Setting standard display
X
Press button V or U repeatedly until
the
Settings menu appears in the
multifunction display.
X
Press button &.
X
Move the selection marker with button
W or X to the Instr. Cluster
submenu.
X
Press button & or * repeatedly until
the message
Select Display appears in
the multifunction display.
The selection marker is on the current
setting.
X
Press button W or X to select the
desired setting.
The selected display appears in the left
multifunction display.
The other display now appears in the right
multifunction display when scrolling
through the
Standard display menu
Lighting submenu
Access the
Lighting submenu via the
Settings menu. Use the Lighting submenu
to change the lamp and lighting settings on
your vehicle.
The following functions are available:
R
Switching daytime running lamp mode on
or off (USA only) (
R
Switching locator lighting on or off
(
R
Switching night security illumination
(Headlamps delayed shut-off feature) on or
off (
R
Switching interior lighting delayed shut-off
on or off (
Switching daytime running lamp mode on
or off (USA only)
X
Press button V or U repeatedly until
the
Settings menu appears in the
multifunction display.
X
Press button &.
X
Move the selection marker with button
W or X to the Lighting submenu.
X
Press button & or * repeatedly until
the message
Light Circuit Headlamp
Mode appears in the multifunction display.
The selection marker is on the current
setting.
X
Press button W or X to select
manual operation (
Manual) or daytime
running lamp mode (
Constant).
With daytime running lamp mode switched on
and the exterior lamp switch in
position $ or Ã, the low-beam
headlamps are switched on when the engine
is running.
In low ambient light conditions the following
lamps will come on additionally:
R
Parking lamps
R
Tail lamps
R
License plate lamps
R
Side marker lamps
For more information on the daytime running
lamp mode, see (
124
Control system
Controls in detail
230_AKB; 6; 22, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-28T18:49:58+02:00 - Seite 124