Manual (wired) – Philips Magnavox Blu-Ray Disc/DVD Player with built in WiFi MBP5220F User Manual
Page 42
EN-42
4. Select “End” to activate the network settings and set the network connection automatically.
Manual (Wired)
In the following cases, select “Manual”(wired) to set each setting as necessary.
- When connection test failed with the setting of “Auto”(wired).
- When instructed by your Internet service provider to make specific settings in accordance with your network
environment.
1. Follow steps 1 to 2 in “Auto (Wired)” on page 41.
2. Use [
О / п] to select “Manual”, then press [OK].
3. Use [
О / п] to select “IP Address”, then press [OK].
4. IP address setting screen will appear. Enter IP address with cursor buttons and number buttons.
Cancel
Next
nce
nce
l
l
l
nce
nce
ce
l
l
l
ext
ext
ext
e
e
Network Settings (Manual)
5/7
Please input the IP Address.
Back
Clear
OK
IP Address
0 . 0 . 0 . 0
• Enter the IP address after checking the specifications of your router.
• If the IP address is unknown, check the IP address of other devices. (e.g. PC connected via LAN cable) and
assign a different number from those other devices.
5. Use [
О / п / Н / Ж] to select “OK”, then press [OK].
6. Select “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS” in turn, and enter each address
number with cursor buttons and number buttons, then press [OK].
• Enter the DNS addresses provided by your Internet provider.
• If the DNS address is unknown, check the DNS address of other devices (e.g. PC connected via LAN cable)
and assign the same DNS address.
Network Setting s (Manual)
Please enter your network settings.
5/7
Cancel
Next
IP Address
: xxx. xxx. xxx. xxx
Subnet Mask
: xxx. xxx. xxx. xxx
Default Gateway : xxx. xxx. xxx. xxx
Primary DNS
: xxx. xxx. xxx. xxx
Secondary DNS
: xxx. xxx. xxx. xxx
7. Use [
О / п / Н / Ж] to select “OK”, then press [OK].
8. Use [
О / п / Н / Ж] to select “Next”, then press [OK].
9. Use [
О / п] to select “Yes” or “No” for proxy server, then press [OK].
• If you use proxy server, select “Yes” to go to the next step.
• If you do not use proxy server, select “No” to go to step 13.
Continued on next page.