Miele NOVOTRONIC T 7644 C - Manual (Page 46)

Extending the range of drying
levels
You can extend the range of the
drying levels for many of the
programs:
Rotary iron+
(dryer than Rotary Iron).
Hand iron+
(dryer than Hand iron).
Normal +
(dryer than Normal).
Additionally, the Extra dry level can
be selected for the Mixed and Denim
Jeans programs.
This programmable function is also
effective in the following programs:
Normal, Wrinkle free*, Mixed*,
Express, Denim/Jeans
(* no Rotary iron+).
For programming and saving in the
memory, follow steps
A to E.
The programmable function is
programmed using the buttons.
Precondition:
– The dryer is switched off.
– The door is closed.
A Press Start/Stop and keep it pressed
it during steps
B-C.
B Press the I-On/0-Off button in.
Wait until the Start/Stop button lights up
continuously . . .
C . . . then release the Start/Stop
button.
– The Gentle indicator light flashes
twice briefly.
–
P and 0 flash alternatively in the
display (default setting).
The number appearing alternatively
with
P means:
0 Default setting
I Drying range steps added
(Express indicator light also flashes)
D Pressing the Start/Stop button
switches from one to the other.
E Using the I-On/0-Off button, switch
the dryer off.
The programming is now stored in
memory. You can change it again at
any time.
To select the extended drying level:
^ Select a program.
^ Press the drying level button
repeatedly until one or two indicator
lights come on.
– Indicator lights Extra dry and Normal
= Normal+
– Indicator lights Normal and Hand
iron = Hand iron+
– Indicator lights Hand iron and Rotary
iron = Rotary iron+
Programmable functions
46