Miele NOVOTRONIC T 7644 C - Manual (Page 24)

Cleaning the lint filtration
components
The lint filter in the door casing and lint
screens in the port-hole capture lint
generated by the drying process. Clean
them after every drying*.
Cleaning without water
Tip: You can dispose of the lint without
touching it by using a vacuum cleaner.
^ Pull the door lint filter (1) out of the
door casing.
^ Rub or vacuum the lint from the
screen surface.
^ Remove the lint from the space in the
door casing with a bottle brush or the
vacuum.
^ Wipe the door casing seal (2) all
around with a damp cloth.
^ Insert the cleaned door lint filter fully
into the door casing.
^ Wipe or vacuum the lint from both lint
screens in the port hole.
^ Close the door.
* Also check the lint screens and
door lint filter when the Clean out
airways indicator light comes on.
Cleaning and care
24