Multi-Tech Systems GFU19 - Manual (Page 17)

GPS1200 GFU19 MultiTech CDMA Modem Quick Guide July, 2005
Page 17/18
GFU19 Multi-Tech CDMA Modem
Appendix 1: Alternative Method of Activation
Step Action Display
2
From the CONFIGURE Send Command to
Device screen:
Activate you MDM number:
• Enter the following commands
exactly as shown and press the F3
(SEND) button after each one has
been entered. The response should
be OK for each entry.
• AT+WSPC=1,000000 (INCLUDE
COMMA!)
• AT+WMDN=n Where n is your 10-
digit Verizon phone number. This
number may extend into the (cont)
field.
• AT+WCMT=1 Wait 10 seconds while
the number is stored.
Activate you MIN:
• AT+WSPC=1,000000 (INCLUDE
COMMA!)
• AT+WIMI=31000n Where n is your
10-digit Verizon MIN. This number
may extend into the (CONT) field.
• AT+WCMT=1 Wait 10 seconds while
the number is stored.
• ATD*22899; Starts OTA activation
(INCLUDE SEMICOLON!)
Continued on next page