Connecting an audio receiver, Stereo audio system, A/v receiver – MITSUBISHI ELECTRIC WS-65315 User Manual

Page 17

��

� � � � �

�

��

� ��

��

� � � ��

��

�

��

�

��

�

��

�

� � � � �

�

��

� ��

��

� � � ��

��

Connecting an Audio Receiver

Stereo Audio System

(Recommended for shelf units or A/V receivers without
digital audio inputs)
(Figure 7)

1. Connect the audio cables from AUDIO

MONITOR OUTPUT on the TV back panel to TV
IN or AUX IN terminals on the back of the audio
system.

• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel

2. Turn off the TV’s speakers through the AUDIO/

VIDEO SETTINGS Menu, page 55.

3. Set the audio system’s input to the TV or AUX

position to hear the TV’s audio through your
stereo system.

A/V Receiver

(Figure 8)

1. Connect either a video cable or an S-Video

cable (but not both) from VIDEO MONITOR OUT
on the back of the A/V receiver to VIDEO INPUT-

1 or INPUT-2 on the TV back panel.

Note: If the A/V receiver outputs an onscreen

menu, this connection allows you to view the

receiver’s menu on the television.

2. Connect a video cable from VIDEO MONITOR

OUTPUT on the TV back panel to VIDEO TV IN

on the back of the A/V receiver.

3. Connect a set of audio cables from AUDIO

MONITOR OUTPUT on the TV back panel to

AUDIO TV IN on the back of the A/V receiver.

• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel

Note: The TV back panel and connections shown here are for reference only and may vary by model.

Figure 7. Connecting the Stereo Audio System.

Figure 8. Connecting the A/V Receiver.

Note: Please see your A/V receiver Owner’s

Guide for more detailed connections.

These types of audio connections do

NOT support multi-channel digital audio.
Please refer to your other devices
Owner’s Guide to verify.

tin

g a
n A
u

io R
ec

eiv

This manual is related to the following products:

WT-42315