Multiquip Stow SideWinder Cut-Off Saw SHS81A - Manual (Page 22)

PAGE 22 — SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08)
Figure 19. Re-Installing Cover Guard
Re-install the guard
K
and V-belt covers . Fully tighten
the two cap screws
J
and reinstall the adjustment knob I .
Re-tension the V-belt by turning the belt tensioning cam .
The V-belt should remain in tension.
Fully tighten the three nuts
N
that lock the V-belt into the proper
tensioning position.
Figure 118. Reversing the Cutting Arm
N
SHS81A CUT-OFF SAW — MAINTENANCE
V-Belt Changing Procedure (continued)