Maytag Epic z W10112943A - Manual (Page 22)

22
■ Stop WRINKLE PREVENT at any time by pressing WRINKLE PREVENT or opening the
dryer door.
■ WRINKLE PREVENT is preset to OFF. The Sensor Dry cycles will retain the WRINKLE
PREVENT setting. For example, if you select WRINKLE PREVENT in the Normal cycle,
WRINKLE PREVENT will be on the next time you select the Normal cycle.
NOTE: WRINKLE PREVENT must be selected with a cycle in order to work. If you do not
select WRINKLE PREVENT, the dryer stops after cool down.
Cycle Signal
The Cycle Signal produces an audible sound when the drying cycle is finished. Promptly
removing clothes at the end of the cycle reduces wrinkling.
Press CYCLE SIGNAL to turn the signal off.
NOTE: When the WRINKLE PREVENT feature is selected and the Cycle Signal is on, an
audible sound will emit every 5 minutes until the clothes are removed, or the WRINKLE
PREVENT feature ends.
Changing Cycles, Options and Modifiers
You can change Sensor Dry Cycles, Timed Dry Cycles, Options, and Modifiers anytime before
pressing Start.
■ Three short tones sound if an unavailable combination is selected. The last selection will
not be accepted.
Changing Cycles after pressing Start
1. Press PAUSE/CANCEL twice. This ends the current cycle.
2. Select the desired cycle and options.
3. Press and hold START. The dryer starts at the beginning of the new cycle.
NOTE: If you do not press Start within 5 minutes of selecting the cycle, the dryer
automatically shuts off.
Changing Options and Modifiers after pressing Start
You can change an Option or Modifier anytime before the selected feature begins.
1. Press PAUSE/CANCEL once.
2. Select the new feature.
3. Press and hold START to continue the cycle.
NOTE: If you happen to press Pause/Cancel twice, the program clears and your dryer shuts
down. Restart the selection process.
Drying Rack Option
Use the drying rack to dry items such as sweaters and pillows without tumbling. The drum
turns, but the rack does not move.
If your model does not have a drying rack, you may be able to purchase one for your model.
To find out whether your model allows drying rack usage and for information on ordering,
please refer to the front page of this manual or contact the dealer from whom you purchased
your dryer.
NOTE: The drying rack must be removed for normal tumbling. Do not use Sensor Dry cycles
with the drying rack.
To use the dryer rack
Do not remove the lint screen.
1. Open dryer door.
2. Place dryer rack inside dryer drum, positioning the back wire on the ledge of the inner
dryer back panel. Push down on front edge of dryer rack to secure over the lint screen.
3. Put the wet items on top of the rack. Leave space between the items so air can reach all
the surfaces.
NOTE: Do not allow items to hang over the edge of the rack.
A. Front edge
A. Dryer rack front edge
B. Dryer back panel
A
A
B