Setting the date and time – Motorola MD751 User Manual
Page 36
18
Settin
g
Up
4
Select FORMAT to scroll through the formats. Stop at
the format you want to set for the area code, then
scroll down to move to the next area code.
5
Repeat steps 3 and 4 to store up to 4 more area
codes. When you are finished, select DONE.
6
Select EXIT to return to the standby screen, or
scroll to a different menu option.
Setting the Date and Time
1
Select MENU.
2
Scroll to DATE/TIME and select SELECT.
3
Enter the time (2 digits are required for both hour
and minutes, so use a leading 0 for 1-digit
values).
4
If using a 12-hour clock, select AM/PM to switch
between am and pm.
5
Scroll down to move the next field.
6
Select CHANGE to change the time format (12 or 24
hour clock). Scroll down to move to the next field.
7
Select CHANGE to select date format
(MM/DD or DD/MM).
8
Scroll down to move the next field.
9
Enter the current date.
10 Select DONE.
11 Select EXIT to return to the standby screen, or
scroll to a different menu option.