Mercedes-Benz 2004 C 320 Sport - Manual (Page 96)

96
Controls in detail
Seats
Head restraint tilt
Two different head restraint angle
positions are available.
̈ Press the release button ( ୴ page 95)
and tilt the head restraint to the
desired position.
Removing and installing rear seat head
restraints (outer seats)
1 Release button
Removing rear seat head restraints
̈ Fold back head restraint ( ୴ page 95).
̈ Pull head restraint to its highest
position.
̈ Push release button 1 and pull out
head restraint.
!
Make sure the head restraints engage
when placing them upright. Otherwise
their protective function cannot be as-
sured.
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Do not interchange head restraints from
front and rear seat.
!
The center rear seat head restraint
cannot be removed.