Mercedes-Benz 2004 C 320 Sport - Manual (Page 135)

135
Controls in detail
Control system
̈ Move the selection marker with
the
æ or ç button to the
CONVENIENCE submenu.
̈ Press button j or k repeatedly
until you see this message in the
display:
EASY-ENTRY FEATURE
ACTIVATE .
The selection marker is on the current
setting.
̈ Press æ or ç to change the
easy-entry/exit setting.
The following settings are available for
the easy-entry/exit feature: Setting key-dependency
Use this function to set whether the
memory settings for the seats, the steering
wheel and the mirrors should be stored
separately for each SmartKey (
୴ page 99).
̈ Move the selection marker with
the
æ or ç button to the
CONVENIENCE submenu.
̈ Press button j or k repeatedly
until you see this message in the
display:
SETTINGS KEY-DEPENDENT .
The selection marker is on the current
setting.
̈ Press æ or ç to set
key-dependency to ON or OFF .
OFF The
easy-entry/exit
feature is
deactivated
STEERING COLUMN Only the
steering column
is moved
STEERING COLUMN +
SEAT Both the
steering column
and the seat are
moved