Konica Minolta bizhub C300 - Manual (Page 49)

3 Transmission
3-10 Network Fax
Tr
an
sm
iss
ion
Chapter 3
3.3.2 Placing Originals on the Platen Glass
Use the platen glass for originals that cannot be placed in the ADF (such as
a book or thick/thin originals).
Placing Originals on the Platen Glass
1
Open the ADF.
2
Place the original FACE DOWN in the
left rear corner, aligning the edge with
the left measuring guide.
3
Gently close the ADF.
3.3.3 Sending Multiple Originals from the Platen Glass
Originals that cannot be sent with the ADF can be sent by using the platen
glass.
Sending Multiple Originals from the Platen Glass
1
If the FAX screen is not displayed, press [Fax] on the control panel to
open the FAX screen.
2
Specify a destination.
3
Set the desired functions as necessary.