Stand installation, Wall-mounting – MITSUBISHI ELECTRIC MITSUBISHI ELECTRIC IMMERSIVE SOUND LCD HDTV SeriesLT-40151 User Manual
Page 8
8
1. Basic Setup and Operation
1
Back
Extension pieces
on back of stand
2
3
TV
CAUTION.
Place the
stand in the foam insert
with the extension pieces
facing away from the TV.
Otherwise, the TV will be
damaged in transit.
Protect the TV and
stand with the original
packing material.
DON’T place your hand where it can get
caught between the TV and stand.
DO support the TV
under the corners.
TV in protective
wrapping
Extension pieces on stand
must face out, away from TV.
Repacking the Stand
Two adults are required to lift the TV.
Wall-Mounting
Stand Installation
1
Back
Extension pieces
on back of stand
2
3
TV
CAUTION.
Place the
stand in the foam insert
with the extension pieces
facing away from the TV.
Otherwise, the TV will be
damaged in transit.
Protect the TV and
stand with the original
packing material.
DON’T place your hand where it can get
caught between the TV and stand.
DO support the TV
under the corners.
TV in protective
wrapping
Extension pieces on stand
must face out, away from TV.
Repacking the Stand
Two adults are required to lift the TV.
If planning to wall-mount the TV, do not install the
stand. To order a wall-mount kit, please contact
Peerless Industries, Inc. at (800) 473-3753 or visit
www.peerlessmounts.com. Order wall-mount kit model
ST650.
CAUTION: Using this TV with other than the authorized accessories may cause the TV to become unstable,
which can cause damage to the product or possible injury.
To order a wall-mount kit from Mitsubishi Digital Elec-
tronics America, Inc., please visit www.mitsuparts.com
or call (800) 553-7278.
Complete installation instructions are included with the kit.
Required: Phillips Screwdriver
CAUTION
At least TWO PEOPLE are
required to install the stand. Support
the TV near the corners as shown. Failure to
follow these recommendations may result in
personal injury and damage to the
product.