MITSUBISHI ELECTRIC MITSUBISHI ELECTRIC IMMERSIVE SOUND LCD HDTV SeriesLT-40151 - Manual (Page 42)

42 4. TV Menus
Speakers The Speakers option displays only if an A/V receiver or headphone connection has been
detected. Detection occurs on the right AVR AUDIO OUTPUT jack or the DIGITAL AUDIO OUT jack.
An A/V receiver can also be detected on an HDMI jack.
TV
Turns on the internal TV speakers.
AV Receiver Turns off the TV speakers so you hear sound only from a connected A/V receiver.
Note: When you disconnect an analog A/V receiver, be sure to change the
Speakers setting to TV to hear sound from the TV speakers.
Headphones Turns off the TV speakers so you hear sound only from connected headphones.
See page 18. This option is not available if
DIGITAL AUDIO OUTPUT is connected.
Subwoofer Off, On
The Subwoofer option displays only if a subwoofer connection has been identi-
fied on the SUBWOOFER OUTPUT jack. The setting you select is applied to all TV
inputs.
Use
Off to turn off audio to a connected subwoofer.
[Subwoofer
level adjust-
ment]
To adjust the subwoofer volume level, highlight Subwoofer and press ENTER to
display an adjustment slider.
Bass Controls volume of low-pitched sound from the TV speakers.
Treble Controls volume of high-pitched sound from the TV speakers.
Balance
Controls audio balance between the left and right TV speakers; available only when Sound Mode
is
Stereo.
Sound Mode Stereo No special audio effects from the TV speakers; monaural programs are played as
mono, stereo and surround sound are played as stereo.
Surround Programs with surround sound are played with Sound Projector surround •
sound.
Other audio is modified:
•
For monaural (non-stereo) programs, creates a simulated stereo effect. -
For stereo programs, creates a simulated - surround sound effect.
Music 153 and 249 Series. Optimizes Sound Projector speakers for music listening.
Night Directs sound to a specific area to lessen the disturbance to others outside the
room. Settings are reset to the default when you power down the TV.
Position yourself in the seating area. 1.
Press 2. ENTER to display an adjustment slider.
Press 3. to adjust the direction of the sound beams until sound seems the
loudest.
Audio
To make audio adjustments:
From the • Adjust > Audio menu:
Press 1. to highlight an option
Press 2. to adjust.
Adjust, continued
While watching TV: • Press the MORE key and then
9 (AUDIO) in the on-screen menu. Press to
select the audio option you want to change. Press
to change settings.