Multi-Tech Systems MT5634ZPX-PCI-U-NV - Manual (Page 16)

3 Remote Configuration
16
MultiModemZPX User Guide
To Change the Remote Escape Character
To further improve security, you can change a remote modem’s remote configuration escape character ei-
ther locally or remotely. The remote configuration escape character is stored in register S9. The factory
default is 37, which is the ASCII code for the percent character (%). Setting S9 to 0 (zero) disables remote
configuration entirely.
CAUTION: If you do this remotely, you won’t be able to change it back remotely.
1. Establish a remote configuration link with the remote modem as described in “Basic Procedure.”
2. Type ATS9=n, where n is the ASCII code for the new remote configuration escape character, and
then press E NTER .
3. Save the new value by typing AT&W and pressing E NTER .
4. Type ATO and press E
NTER
to exit remote configuration.