Meridian America 508 - Manual (Page 14)

Using the CD player
10
Playing a disc
The CD player allows you to play an entire disc, or start playing
from any track. While a disc is playing you can go back to the
start of the track or skip to the start of the next track.
If you have programmed a selection, these functions also work
with the selection of tracks you have programmed. For
information about programming; see Programming a selection,
page 12.
To play the disc
● Press > (Play).
The display will show your
selection:
Play 1
The display will then show
the track being played:
1
To restart the current track
● Press [ (Previous).
To move to the next track
● Press > (Play).
To play starting from a particular track
● Press ] (Next) or [ (Previous) to step through the track
numbers until the track you want to play is displayed, or type
the number of the track (remote only).
For example:
Track 4
With the remote you will need to press CD first if you have the
504 Stereo FM Tuner.
After a short delay the track you have selected will start to play.
If you have programmed a selection you will also need to:
● Press > (Play).