Playback, Dvd functions – Philips Magnavox DP100MW8 User Manual
Page 9
– 9 –
EN
DVD FUNCTIONS
STANDBY-ON
AUDIO
SUBTITLE
ANGLE
REPEAT
CLEAR
A-B
PAUSE
SLOW
SKIP
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
7
8
9
0
+10
PLAY
REV
FWD
STOP
DVD FUNCTIONS
Please note : most instructions in this manual refer to remote control use.
Playback
Before:
Turn on the TV, amplifier and any other
device which are connected to this unit.
Make sure the TV and audio receiver are
set to the correct channel.
(
⇒
on page 10
)
Note:
• When you play back a CD-RW/-R with MP3 files,
details on page 10.
• A “ ” may appear at the top-right on the TV
screen when the operation is prohibited by the disc or this
unit.
• Some DVD may start playback from title 2 or 3 due to
specific programs.
• During the playback of a 2-layered disc, pictures may
stop for a moment. This happens while the 1st layer is
being switched to the 2nd layer. This is not a malfunction.
• You can change the on-screen language in “PLAYER
MENU” setting. (Refer to page 14.)
4
3
1
IR
P-SCAN
PLAY
STOP
OPEN/
CLOSE
1
Press [STANDBY-ON] to turn on
this unit.
2
Press [OPEN / CLOSE A] and
insert a disc with label facing up.
3
Press [PLAY B] to start playback.
4
Press [STOP C] to stop playback.
2
2
2
1
Lights up when power is on.
Resume Playback
Press [STOP C] during playback. Resume icon
will appear at the top-left on the TV screen.
Press [PLAY B], playback will resume from
the point at which playback was stopped.
Slow Forward Search
Press [FWD g] repeatedly in the pause
mode to select the required forward speed.
To continue playback, press [PLAY B].
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].
Note:
• Slow forward speed is different depending on the disc.
Approximate speed is 1(1/32), 2(1/16), 3(1/8), 4(1/4) and
5(1/2).
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if
pictures in the slow playback mode are blurred. (Refer to
pages 14-15.)
• The reverse of slow playback is not available.
Fast Forward / Reverse Search
Use [FWD g] or [REV h] repeatedly
during playback to select the required
forward or reverse speed.
To continue playback, press [PLAY B].
1
E
1
Note:
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if
pictures in the pause mode are blurred. (Refer to pages
14-15.)
PAUSE
Note:
• Menu operations may vary depending on the disc. Refer
to the manual accompanying the disc for more details.
R.STOP
Note:
• To cancel resume, press [STOP C] one more time in the
stop mode.
• The resume information will be kept even when unit is in
standby mode.
• For MP3, playback will resume from the beginning of the
track at which playback was stopped.
Note:
• Fast forward or reverse search speed is different
depending on the disc. Approximate speed is 1(x2), 2(x4),
3(x8), 4(x16) and 5(x32).
Note:
• Zooming function does not work while the disc menu is
displayed.
• Some part of the picture may not be zoomed depending
on the disc or playback status.
Zoom
1) Press [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x3, x4, x1/2 or off.
x2
x3
x4
x1/2
2) Use [K / L / s / B] to slide the zoomed picture across
the screen.
3) To exit zoom function, press [ZOOM] repeatedly to select
OFF.
Disc Menu
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the disc menu.
• Press [TOP MENU] to call up the title menu.
2
3 4
E6C0TUD.indd 9
E6C0TUD.indd 9
2007/04/03 10:37:37
2007/04/03 10:37:37