Section 4 – Miller Electric Digital Elitet User Manual

Page 12

OM-234 388 Page 10

SECTION 4 − ADJUSTING HEADGEAR

There are four headgear adjust-
ments: headgear top, tightness,

angle adjustment, and distance

adjustment.

Headgear Top

Adjusts headgear for proper depth

on the head to ensure correct bal-

ance and stability.
2

Headgear Tightness

To adjust, push in the adjusting knob

located on the back of the headgear

and turn left or right to desired tight-

ness.

If adjustment is limited, it may be
necessary to remove the com-

fort cushion.

Distance Adjustment

Adjusts the distance between the

face and the lens. To adjust, loosen

both outside tension knobs and

press inward to free from adjustment

slots. Move forward or back to de-

sired position and retighten. (Both

sides must be equally positioned for

proper vision.)
4

Angle Adjustment

Four pins on the right side of the

headband top provide adjustment

for the forward tilt of the helmet. To

adjust, loosen the right outside ten-

sion adjustment knob then lift on the

control arm tab and move it to the de-

sired position. Retighten tension ad-

justment knob.

When using the back distance
adjustment positions, only the

back three angle adjustment

pins can be used.

804 118