Marantz PD4293D User Manual

Page 29

Reducing noise in the picture
Use these settings if the picture has noise due to poor
reception or when playing video tapes on which the picture
quality is poor.

Example: Setting “NR-3”

Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...

1. Use the

▲ and ▼ buttons to select “PICTURE”, then

press the PROCEED button.
The “PICTURE” screen appears.

2. Use the

▲ and ▼ buttons to select “NR”.

P I C T U R E

: MEMORY

: 2

OFF

SEL.

ADJ.

RETURN

EXIT

CONTRAST

BRIGHTNESS

SHARPNESS

COLOR

TINT

PICTURE MODE

COLOR TEMP.

3. Use the

ᮤ

and

ᮣ

buttons to select “NR-3”.

The mode switches as follows when the

ᮤ

and

ᮣ

buttons are pressed:

→ OFF ↔ NR-1 ↔ NR-2 ↔ NR-3 ←

NR-3

* If neither the

ᮤ

ᮣ

button is pressed within 5 seconds,

the current selection is set and the previous screen
reappears.

4. Once the setting is completed ...

Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.

Information

Ⅵ NR
* “NR” stands for Noise Reduction.
* This function reduces noise in the picture.

Ⅵ Types of noise reduction
There are three types of noise reduction. Each has a
different level of noise reduction.
The effect becomes stronger as the number increases
(in the order NR-1

→ NR-2 → NR-3).

OFF ............... Turns the noise reduction function off.