Metrologic Instruments StratosS MS2222 - Manual (Page 57)

53
S CANNER AND C ABLE T ERMINATIONS
C ABLE C ONNECTOR C ONFIGURATIONS
Aux Port Configuration Cable
*
, MLPN 57-57008 x-N-3
Pin Function
**
1 No Connect
2 Output from Scanner
3 Input to Scanner
4 No Connect
5 Ground
6-9 No Connect
9-Pin D-Type Connector
RS232 LSO/AUX Cable, MLPN 57-57099 x-3
Pin Function
†
1 Signal Ground
2 RS232 from Aux / Secondary Scanner
3 RS232 to Aux / Secondary Scanner
4 RTS from Aux / Secondary Scanner
5 CTS to Aux / Secondary Scanner
6-8 No Connect
9 +5VDC – Transformer / Direct
10 Shield Ground
10-Position Angled Modular Plug
* This configuration cable was designed to be used with the StratosS auxiliary connector only.
** All signals are referenced from the StratosS scanner.
† All signals are referenced from the auxiliary / secondary scanner.
Specifications are subject to change without notice.