Mitel 5220 - Manual (Page 22)

-18-
Messaging - Callback
To leave a message waiting indication on a phone when you hear busy
or ringback tone:
z
Press MESSAGE or the Callback softkey.
To respond to a message waiting condition on your phone:
1. Press MESSAGE.
2. If a password is required, dial your password and press the Enter
softkey.
3. Press the Yes softkey.
4. Do one or all of the following (if required):
„
To display the time the message was sent, press the More softkey.
„
To display the number of the caller, press the More softkey twice.
5. Do one of the following:
„
To call the message sender, press the Call softkey.
„
To delete the message, press the Erase softkey.
„
To view the next message, press MESSAGE.
To check for messages from a remote station:
1. Press SUPERKEY.
2. Press the No softkey until "Remote Msging?" appears.
3. Press the Yes softkey.
4. Dial your extension number.
5. Press the Enter softkey.
6. If a password is required, enter your password and press the Enter
softkey.
7. Press the Yes softkey.