Monte Carlo Fan Company 5SCR60BR3 - Manual (Page 3)

Loosen lock nuts and screws on yoke
till you can not feel screw on inside
of yoke.
Remove keeper from cross pin and
then cross pin from yoke. Replace
keeper on cross pin and save.
12 11
Lift mounting neck to mounting Plate and align
screws.
7
Secure mounting neck to the mounting plate
with four screws to become a complete mount-
ing bracket.
8
Loosen set screws that holds ball.
9
Slide ball down and remove pin save
pin for later.
10
Install top cover over downrod onto
fan body.
18
Align hole in downrod with hole in
yoke and install cross pin. Install
downrod into yoke. Install keeper
into cross pin.
13
Tighten 2 downrod set screws and
lock nuts.
14
Install cage on fan body.
15
Install 4 x 15 watt incandescent can-
delabra bulbs.
17
Place glass into cage on fan body.
16