Micro Star Computer MS- 9130 v1.x - Manual (Page 71)

VIA VT8237 Serial ATA RAID Introduction
A-9
Create and Delete Spare Hard Drive
If a RAID 1 array is created and there are drives that do not belong to
other arrays, the one that has a capacity which is equal to or greater than the
array capacity can be selected as a spare drive for the RAID 1 array. Select
Create/Delete Spare and press , the channel column will then be
activated. Select the drive that you want to use as a spare drive and press
, the selected drive will be marked as Spare. The spare drive cannot be
accessed in an OS.
To delete a spare drive, highlight Create/Delete Spare and press .
The spare drive will be highlighted, press to delete the spare drive.