Micro Star Computer MS- 9130 v1.x - Manual (Page 29)

2-16
MS-9130 Workstation Mainboard
Fan Power Connectors: CFAN1/2, SFAN1/2, NBFAN1
The CAN1/2 (processor fan), SFAN1/2 (system fan) and NBFAN1
(Northbridge fan) support system cooling fan with +12V. It supports 3-pin
head connector. When connecting the wire to the connectors, always take
note that the red wire is the positive and should be connected to the +12V, the
black wire is Ground and should be connected to GND. If the mainboard has a
System Hardware Monitor chipset on-board, you must use a specially designed
fan with speed sensor to take advantage of the CPU fan control.
MSI Reminds You...
Always consult the vendors for proper CPU cooling fan.
NBFAN1 CFAN1, CFAN2 SFAN1
SENSOR
+12V
GND
Fan Connector
Pin Definition
LCD Panel Connector: JLCD1
The connector is additionally provided for connection to a LCD panel,
which shows information on the panel for you to identify the current status or
mode of the connected system.
PIN SIGNAL
1 TX
2 RX
3 NC
4 GND1
5 GND0
6 VCC
JLCD1
1 2
5 6