Micro Star Computer MS- 9130 v1.x - Manual (Page 21)

2-8
MS-9130 Workstation Mainboard
Power Supply
The mainboard supports SSI power supply for the power system, while
ATX power supply is also available for this mainboard. Before inserting the
power supply connector, always make sure that all components are installed
properly to ensure that no damage will be caused.
PIN SIGNAL
13 +3.3V
14 -12V
15 GND
16 PS-ON#
17 GND
18 GND
19 GND
20 Res
21 +5V
22 +5V
23 +5V
24 GND
PIN SIGNAL
1 +3.3V
2 +3.3V
3 GND
4 +5V
5 GND
6 +5V
7 GND
8 PWR OK
9 5VSB
10 +12V
11 +12V
12 +3.3V
JPR1 Pin Definition
JPR1
1 12
24 13
PIN SIGNAL
1 GND
2 GND
3 12V
4 12V
JPWR2 Pin Definition
JPWR2
1 3
4 2
SSI 24-Pin Power Connector: JPR1
This connector allows you to connect an SSI power supply. To connect
the SSI power supply, make sure the plug of the power supply is inserted in the
proper orientation and the pins are aligned. Then push down the power sup-
ply firmly into the connector.
SSI 12V Power Connector: JPWR2
This connector is used to provide +12V power output to AGP Pro add-on
card.