MGE UPS Systems GES-102L - Manual (Page 14)

Always “On” UPS Systems Inc.
14
Software Options
UPSilon 2000 Software
The UPSilon 2000 software utilizes standard RS-232 interface to perform monitoring functions,
and provides an orderly shutdown of a computer system in the event of power failure. Moreover,
UPSilon 2000 displays all the diagnostic symptoms through a graphical interface, such as
Voltage, Frequency, Battery Level, etc.
The software is available for DOS, Windows 3.x, Windows 95/98/00 & Windows NT V3.5 or
later, FreeBSD, Linex, Novell and more.
Interface Kits
A series of interface kits are available for various operating systems that provide UPS
monitoring. Each interface kit includes the special interface cable required to convert status
signals from the UPS into signals that the individual operating system will recognize. The
interface cable at the UPS side must be connected to the REMOTE PORT, at the computer side it
can be connected to either COM1 or COM2. For other installation instructions and powerful
features please refer to READ ME file included within the software.
Caution: Use only factory supplied or authorized UPS monitoring kits!