Motorola B801 - Manual (Page 23)

Using the phone 23
3.3.7 Make a CELLULAR call
1. Enter the telephone number, and then press I .
2. Press / to make corrections when entering the phone
number.
3. If there is only one Bluetooth enabled mobile phone
paired up, press P or I again to dial out. Or if there
are two Bluetooth enabled mobile phones paired up,
press
, to select the desired one, and then press P
or I to dial out.
OR
1. Press
I . If there is only one Bluetooth enabled mobile
phone paired up, press P or I again to enter dial
mode. Or if there are two Bluetooth enabled mobile
phones paired up, press
, to select the desired one.
And then press P or I .
2. Enter the telephone number. Press / to make
corrections when entering the phone number.
3. Press I to dial out.
NOTES
1. Some Bluetooth enabled mobile phones may have a
default setting that disables the feature of making a call
through the Bluetooth connection. Make sure this
setting is enabled before making a CELLULAR call.
2. You may hear interference if your Bluetooth enabled
mobile phone is too close to the telephone base during
a CELLULAR call. Make sure that your Bluetooth
enabled mobile phone is between one to 12 feet away
from the telephone base in order to maintain a reliable
connection between your Bluetooth mobile phone,
telephone base, and cell tower.
3.3.8 Answer a CELLULAR call
• Press I or J .
3.3.9 End a CELLULAR call
• Press > or return the handset to the telephone base or
charger. The screen displays the elapsed time as you
talk (in hours, minutes and seconds).
3.3.10 Call waiting on the CELLULAR line
If you subscribe to call waiting service provided by your
cellular service provider, you will hear one or more beeps if
you have an incoming CELLULAR call while already on a
call. Press
I to put your current call on hold and take the
new call. You can press I at any time to switch back and
forth between calls.