McIntosh UR12 User Manual
Page 9
9
Touch Screen
The Touch Screen allows for the selection
and controlling of different components
through multiple On-Screen Pages.
Mute
Press the MUTE Push-button to mute the
audio and a second time to unmute. The
MUTE Push-button is also used in
conjuction with other push-buttons to per-
form programing and other functions.
Transport Functions
Use the PLAY, FAST-FOWARD
,
FAST REVERSE
and STOP¡ Push-
buttons to operate a DVD/CD player,
DVD/CD changer or tape recorder.
Channel Functions
Press and release the CHannel Up or
Down Push-button to move from station
to station on both the AM and FM Dial. In
a similar fashion, use the CHannel Up or
Down Push-button to select the next
available TV Channel. When playing a
DVD, CD or Tape the CHannel Up
Push-button will select the Next Selec-
tion, Track or Chapter and the CHannel
Down will select the Previous
(Back) Selection, Track or Chapter.
Main
Press the MAIN Push-button to select the
Main Touch Screen Menu. The MAIN
Push-button is also used in conjuction with
other push-buttons to perform program-
ming and other functions.
How to Operate the Remote Control
Previous Channel
When viewing TV Channels, pressing the
PREvious CHannel Push-button will select
the last TV Channel Selected.
Volume
Press the UP or DOWN VOLume
Push-button to raise or lower the listening
volume level.
Power
Switches AC Power ON or OFF for a
McIntosh Control Center or Preamplifier.
If a non-McIntosh Component is being
controlled (ie. TV), then the UR12 will
switch AC Power ON or OFF for that com-
ponent.
Lighting
Press and release the LIGHT Push-button
to momentarily illuminate the Touch
Screen and the UR12 Push-buttons.
Page
Press the PAGE Push-button to select dif-
ferent Pages of Menus displayed on the
Touch Screen. The MAIN Push-button is
also used in conjuction with other push-
buttons to perform programming and other
functions.
Joystick
The Joystick allows, the cursor to move in
four directions, selects different Touch
Screen Menu Options and the On-Screen
Menus of Source Components. By press-
ing the Joystick down, it also functions as
an Enter key to select the displayed func-
tion.