McIntosh UR12 - Manual (Page 14)

14
Touch Screen Contrast
All the programming is done by first enter-
ing the SYSTEM SETTING Mode in the
remote control. Press both the MAIN and
PAGE buttons simultaneously for five sec-
onds to enter the SYSTEM SETTING
mode. Refer to figure 7. Move the cursor
on the screen with the joystick to your se-
lection in the list. Enter the selection by
pushing down the joystick. You can exit
Figure 7
SYSTEM SETTING
1. TOUCH PAD ALIGNMENT
2. SYSTEMS & OPTIONS
3. PREPROGRAM
4. LEARNING
5. EDIT BUTTONS
6. SET DATE & CLOCK
7. PROGRAM LOADING
8. TO EXIT
SELECT : JOY STICK
ENTER : JOY STICK

—
‚
The UR12 is designed to operate up to
twelve components. They are Control Cen-
ter (labeled MAC), CATV, Satellite, TV,
DVD, VCR1, VCR2, Laser Disc, Tuner,
CD, Tape and AUX. However, the device
button name can be changed to meet your
exact needs. You can also create a favorite
device page and transfer the frequently
used devices to the favorite device page in
order to change the device button sizes and
shapes. Once you create the favorite de-
vice page, it will appear as a default device
page. There are also four pages of the LCD
screen for each device and you can use
them to create, delete or edit any func-
tional buttons to customize with your au-
dio/video components.
Overview
The contrast of the TOUCH SCREEN can
be adjusted by pressing either the CHAN-
NEL UP or DOWN button while holding
down the MAIN button. Release the but-
tons when you reach the optimal level of
contrast. Refer to figure 7.
Entering the System Settings