Motorola BR700 - Manual (Page 31)

SECTION 2 INSTALLATION
2-18 SECTION 2, INSTALLATION
Static IP
If you are required to use a permanent IP address for connecting to
the Internet, then select Static IP. Your ISP informs you if this is the
connection to use.
1 From Connection Mode, select Static IP.
2 In the IP Address field, enter the IP Address supplied by your
ISP.
3 In the Subnet Mask field, enter the Subnet Mask supplied by
your ISP.
4 In the Default Gateway field, enter the values supplied by your
ISP.
5 In the Primary DNS field, enter the values supplied by your ISP. If
necessary, enter secondary or tertiary DNS values into the
Secondary or Third DNS fields.
6 Click Apply to save the setting, or, if you wish to start over, click
Cancel.
PPTP
Point to Point Tunneling Protocol (PPTP) is a service commonly
found in Europe.
1 From Connection Mode, select PPTP.
2 In the PPP User Name field, enter the PPP User Name supplied
by your ISP.
3 In the PPP Password field, enter the PPP Password supplied by
your ISP.
4 In the PPTP Client IP field, enter the PPTP Client IP address
supplied by your ISP.
5 In the PPTP Server IP field, enter the PPTP Server IP address
supplied by your ISP.
6 Click Apply to save the setting, or, if you wish to start over, click
Cancel.