Side marker lamp bulb – Mercedes-Benz 2003 C-Class User Manual
Page 294

294
Practical hints
Replacing bulbs
̈
Twist bayonet socket 5 counterclock-
wise to the stop (do not remove).
̈
Pull the bulb out of the socket.
̈
Insert the new bulb so that the base
locates in the recess in the bayonet
socket 5.
̈
Twist bayonet socket clockwise until
you hear it snap into place.
̈
Plug the connector onto the bulb.
̈
Align headlamp cover 2 and click into
place.
Front turn signal lamp bulb
̈
Switch off the lights.
̈
Open the hood (
̈
Twist bulb socket 1 counterclockwise
and pull out.
̈
Push bulb into socket, turn counter-
clockwise and remove.
̈
Insert new bulb in socket, push in and
twist clockwise.
̈
Reinsert bulb socket in lamp and twist
clockwise.
Parking and standing lamp bulb
̈
Switch off the lights.
̈
Open the hood (
̈
Press the clamp and remove headlamp
cover 2.
̈
Pull out the bulb socket 6 with the
bulb.
̈
Pull the bulb out of the bulb socket.
̈
Insert a new bulb in the socket.
̈
Reinstall the bulb socket.
̈
Align headlamp cover 2 and click into
place.
Side marker lamp bulb
̈
Switch off the lights.
̈
Carefully slide lamp towards rear.
̈
Remove front end first.
̈
Twist bulb socket counterclockwise
and pull out.
̈
Pull bulb out of the bulb socket.
̈
Insert new bulb in socket.
̈
Reinstall bulb socket, push in and twist
clockwise.
̈
To reinstall lamp, set rear end in
bumper and let front end snap into
place.