Matsushita CF-W5LWEZZ1 2 - Manual (Page 47)

47
9.3.2.18. Assembly of the Hinge Cover (L), (R)
Engages with LCD front
goods which have prepared
LCD rear
Refer to Figure 1
Refer to Figure 2 Refer to Figure 2
Multiply the fingernail
in 16 all places surely
SIMM cover WAN
Insertion
Antenna cover
Lock engagement
The fingernail in four places is inserted
PANASONIC LABEL PANASONIC LABEL Panasonic label
Cable drawing out route Cable drawing out route Safety work Safety work
Safety work Safety work
The cable is drawn out
between front and rear.
The cable is drawn out
between front and rear.
Hinge cover installation OK figure
Hinge cover installation NG figure
Hinge cover R
(Note)
Because the fixed lock medicine is used,
the screw cannot be repeated and be used.
Screw
Screw
Install the back pushing
when you tighten the screw.
(Left side is similarly executed.)
(Space generation prevention
of cover)
Screw
Screw
a
a
b
b
Hinge cover L
The cover externals and the
front rib are parallel
(agreement).
The cover externals are not
parallel to the front rib. Inclines.
The cable is processed under the axis.
It is confirmed that the cable does not narrow
between cabinets.
TP cable
The order of tightening screw:a b
Screw DRHM0076ZA
Safety work
The cable is processed under
the axis . It is confirmed that
the cable does not narrow
between cabinets.
Safety work
9.3.2.17. Assembly of the LCD Rear