Matsushita CF-W5LWEZZ1 2 - Manual (Page 31)

31
9.2.12. Removing the Drive Unit
Preparation : perform the section 9.2.1. to 9.2.4.
first.
1. Peel off the tape from the connector.
2. Remove the drive FFC from the connector (CN501)
and remove out the drive unit.
9.2.13. Removing the USB Board
Preparation : perform the section 9.2.1. to 9.2.4.
first.
1. Remove the connector (CN23) on the main board.
2. Remove the USB board from the bottom case.
9.2.14. Removing the Antenna Board (L,R)
Preparation : perform the section 9.2.1. to
9.2.11. first.
1. Remove the antenna cable (L, R) on the wireless
LAN module and then remove the antenna board
from the bottom case.
2. Remove the DC-IN cable (CN600) from the main
board.
9.2.15 . Removing the Wireless LAN
Module
reparation : perform the section 9.2.1. to 9.2.4.
and 9.2.14. first.
1. Remove the 2 screws (U) and then remove the
wireless LAN module.
Screw (U) : DXQT2+D25FNL (N8)
Tape
CN501
Drive FFC Drive unit
CN23
USB Board
USB Cable
Antenna Cable(L)
Antenna Cable(R)
CN600
DC-IN
Cable
Antenna Board(L)
Antenna Board(R)
Wireless LAN
Module
Main Board
Screw (U) Screw (U)