Memorex MVDP1075 - Manual (Page 27)

26
BASIC OPERATION
IMPORTANT:
When “ ” appears while pressing a button, this means that the
corresponding function cannot be performed either on the disc inserted, or
in the selected mode.
Press the MUTE button once to mute the
sound; “MUTE” will appear on the screen.
Press the MUTE button again to restore the
sound; “MUTE OFF” will appear temporarily
on the screen.
1
2
1
Press the P/N button to switch back and
forth between NTSC and PAL. In the USA,
the standard is NTSC.
1
2
1
P/N MUTE
For private listening, plug headphones into
this jack. The speaker will be disconnected
when a plug is inserted into this jack.
1
HEADPHONE JACK
Press to cycle between standard 4:3 size
(TV) and full screen (will fill the LCD
screen).
1
2
1
LCD MODE Button