Metrologic Instruments IS8000 - Manual (Page 28)

24
A PPENDIX B ( CONTINUED )
P ARAMETER D EFAULT RS-232 RS-422
L IGHT
P EN
Fire triac if good read/match 9 9 9
Fire triac if bad match 9 9 9
Fire triac if no read 9 9 9
Triac Duration (sec.) 9 9 9
Delay Time before firing (sec.) 9 9 9
Enable programmable 'No Read' message 9 9 9
Retain same symbol timers along with line sensor 9 9 9
Supports dual line sensor inputs 9 9 9
Buffer scans until line sensor cycle completes 9 9 9
Save read and match bar code if power down 9 9 9
SCAN RANGE
Close, Extended and Normal Extended 9 9 9
RESERVE CODES
Reserve Code 1-99 9 9 9
RS232 FORMAT
BAUD
300-38,400 9600 9 9
DATA FORMAT
Odd, Space, Even, Mark, None Parity Space 9 9
7 Data Bits/8 Data Bits 7 Data Bits 9 9
1 Stop bit/2 Stop bits 2 Stop bits 9 9
OPTIONS
Ack/Nak handshaking 9 9
CR * 9 9
LF * 9 9
DTR support 9 9
Nixdorf ID 9 9
RTS/CTS handshaking 9 9
RTS/CTS (character) 9 9
RTS/CTS (message) 9 9
ETX suffix 9 9
STX prefix 9 9
Tab prefix 9 9
Tab suffix 9 9
UPC prefix 9 9
UPC suffix 9 9
Schlumberger/Shell format 9 9
Transmit AIM ID Chr 9 9