Features, Connections – MidiLand 7100M User Manual

Page 4

With the power switch in the off position and the power transformer plug not connected,
refer to the instructions and illustrations below.

Locate the 10’ 9-pin to 9-pin interface cable

interface cable

interface cable, plug one end of the 9-pin CM-7 interface connector to the subwoofer’s amplifier

located at the rear of the subwoofer unit and the other end to rear of the CM-7 control module

CM-7 control module

CM-7 control module. If you have chosen to mount

the control module internal to a computer, than you must locate the 2’ 9-pin to 9-pin ribbon cable and refer to illustration I-1

illustration I-1

illustration I-1.

Using the supplied speaker cable

speaker cable

speaker cable connect the front left, front right, rear left, rear right and center satellite speakers to the

subwoofer amplifier’s output

output

output. The connection terminals are simple plug-in type, needing only to be concerned with connecting

the output to the correspondent speaker and the type of connection. Refer to illustration I-2

illustration I-2

illustration I-2.

In the package please locate a 1.5’ dual RCA to stereo 3.5 mm stereo jack cable

3.5 mm stereo jack cable

3.5 mm stereo jack cable. This cable is intended to connect a

computer’s sound card, a portable CD player, or wherever a source with a 3.5mm jack is required to one of the amplifier’s RCA
inputs. If another type of connector is required, please check with your sound appliance vendor for the adaptor you may need.
Using this 1.5’ cable, simply plug the RCA

RCA

RCA end into the Audio Cable

Audio Cable

Audio Cable and connect the RCA plugs

RCA plugs

RCA plugs into the amplifier’s input

input

input.

The red color RCA plug should be connected to the “right” input and the white color RCA to the “left” input. See to the specifica-
tions section for further details. Refer to illustration I-2 to I-6 for your ”SPECIFIC

illustration I-2 to I-6 for your ”SPECIFIC

SOUND SOURCE CONNECTION.”

Power is supplied to the S4 MidiLand™ 7100

S4 MidiLand™ 7100

S4 MidiLand™ 7100 via a supplied external Power Transformer

Power Transformer

Power Transformer. The correct voltage adapter is

supplied for the territory you purchased the unit in. First, make sure to connect the coaxial power plug into the labeled power
receptacle on the rear of the subwoofer. Second, connect the country specific corded plug into an approved and properly function-
ing AC wall outlet. DO NOT

DO NOT

DO NOT use an extension cord or an overly crowded wall plate. Third, make sure the power button is

pushed in on the control module.

FEATURES

44444

•

100 WATT RMS INTEGRATED POWER AMPLIFIER

•

6½” (165mm) SUBWOOFER

•

2½” (65mm) WIDEBAND SATELLITE SPEAKERS

•

INTERNAL/EXTERNAL REMOTE CONTROL MODULE

•

5.1 MULTI-CHANNEL

•

EXTERNAL LOW-NOISE POWER TRANSFORMER

COMPLETE MAGNETIC/VIDEO SHIELDING

SMALL DESKTOP “FOOTPRINT”

DYNAMIC SOUND QUALITY

PATENT PENDING CM-7 INTERFACE

DOLBY DIGITAL READY

CONNECTIONS

This manual is related to the following products:

7100