Philips Magnavox MC09D5MG - Manual (Page 8)

8 Setting TV Channels for the First Time
The TV/VCR can memorize the channels you receive in your
area. If you are using a Cable Box or Satellite Box, you do
not need to set channels at the TV/VCR. Set the TV/VCR to
the output channel of the Cable Box or Satellite Box (chan-
nel 03 or 04). Then select the channel to be viewed on the
Cable Box or Satellite Box.
If you do not see these menus when you turn on the
TV/VCR, set TV channels as instructed on page 10 instead.
1 Press POWER to turn on the TV/VCR.
2 Press F.FWD/B or REW/s to select ENG-
LISH or ESPAÑOL (Spanish). The selected lan-
guage will appear inside the [ ].
– SET UP –
B LANGUAGE
[ENGLISH]
ESPAÑOL
AUTO PRESET
• The TV/VCR distinguishes
between standard TV channels
and cable channels.
• To play or record a video tape
before setting TV channels, press
the MENU button on the remote
control. To set up channels later,
see Resetting TV Channels on
page 10.
• To select cable channels higher
than 99, press the +100 button,
then press the Number buttons
for the last two digits. For exam-
ple, to select channel 125, press
+100, 2, 5. Precede single-digit
channel numbers with a zero
(for example, 01 ... 09).
Helpful Hints
3 Press PLAY/▲ or STOP/▼ to select AUTO
PRESET. Then press F.FWD/B. The TV/VCR
scans and memorizes all active channels in your area.
When scanning is complete, the TV/VCR will go to
the lowest available channel automatically.
Use the CH(annel) o/p buttons to select memo-
rized channels. Use the Number buttons to select
non-memorized channels.
– SET UP –
LANGUAGE
[ENGLISH]
ESPAÑOL
B AUTO PRESET
TIME SEARCH MUTE RECORD
SPEED RESET
0
8 9 7
5 6 4
2 3 1
PAUSE/STILL
+100
STOP
F.FWD
PLAY
REW
VOL.
DISPLAY MENU
POWER SLEEP/WAKE UP
CH.
ALT.CH
1
2-3
MC09D5MG 4/12/02 12:20 PM Page 8