Philips Magnavox MC09D5MG - Manual (Page 28)

28 Timer Recording (cont’d)
Extending a Timer Recording
To make a Timer Recording start and end later than originally sched-
uled, follow these steps.
1 Press POWER to turn on the TV/VCR.
2 Press MENU. Press PLAY/▲ or STOP/▼ to select TIMER PRO-
GRAMMING. Press F.FWD/B.
3 Press RECORD, then press PLAY/▲ or STOP/▼ to select the
desired program.
4 Press RECORD again. Each press of RECORD will shift forward the
beginning/end time by 10 minutes. If the recording is in progress,
each press will shift forward the end time only.
If you adjust the times during recording, the recording speed auto-
matically changes to SLP.
To restore the original recording times, press PAUSE/STILL.
5 Press F.FWD/B or REW/s , then press MENU to remove the
menu.
6 If the timer recording is scheduled to start later, press POWER to
turn off the TV/VCR for the recording.
Correcting a Timer Recording
1 To correct information in a Timer Recording after you have finished
setting it, press POWER to turn on the TV/VCR.
2 Press MENU. Press PLAY/▲ or STOP/▼ to select TIMER PRO-
GRAMMING. Press F.FWD/B.
3 Press PLAY/▲ or STOP/▼ to select a timer recording, then press
F.FWD/B.
4 Press F.FWD/B repeatedly to select the information you want to
change. Press REW/s to go back if necessary. Press PLAY/▲ or
STOP/▼ to enter the correct information.
5 Press POWER to turn off the TV/VCR again to set the recording.
Cancelling Timer Recordings
To cancel a timer recording that is in progress:
1 Press POWER to turn on the TV/VCR, then press STOP/EJECT on
the TV/VCR.
To cancel a timer recording that has not started:
1 Press POWER to turn on the TV/VCR.
2 Press MENU. Press PLAY/▲ or STOP/▼ to select TIMER PRO-
GRAMMING. Press F.FWD/B.
3 Press PLAY/▲ or STOP/▼ to select a timer recording, then press
F.FWD/B.
4 Press RESET.
5 Press MENU to remove the menu.
Checking Scheduled Timer Recordings
1 Press POWER to turn on the TV/VCR. The REC(ord) light will turn
off.
2 Press MENU. Press PLAY/▲ or STOP/▼ to select TIMER PRO-
GRAMMING if necessary.
3 Press F.FWD/B. The program details will appear on the screen.
4 Press MENU to remove the menu.
MC09D5MG 4/12/02 12:20 PM Page 28