Pin assignments for the keyboard wedge y cable – Metrologic Instruments MS6720 User Manual
Page 43
37
A
PPENDIX
C (C
ONTINUED
)
Pin Assignments for the 5-pin DIN and 6-pin mini-DIN MS6720 Hand-
Held Laser Scanner with Built-in PC Keyboard Wedge Interface
The coil cable is terminated with a 5-pin DIN female connector on one end,
and a 6-pin mini DIN male on the other. Metrologic will supply an adapter
cable with a 5-pin DIN male connector on one end and a 6-pin mini DIN
female connector on the other.
According to the termination required, connect the appropriate end of the
adapter cable to the coil cable, leaving the necessary termination exposed
for connecting to the keyboard and the keyboard port on the PC. The pin
assignments are as follows:
5-pin Female DIN
6-pin Female mini-DIN
Pin
Function
Pin Function
1
Keyboard Clock
1
Keyboard Data
2
Keyboard Data
2
No Connect
3
No Connect
3
Power Ground
4
Power Ground
4
+5 Volts DC
5
+5 Volts DC
5
Keyboard Clock
6
No Connect
5-pin Male DIN
6-pin Male mini-DIN
Pin
Function
Pin
Function
1
PC Clock
1
PC Data
2
PC Data
2
No Connect
3
No Connect
3
Power Ground
4
Power Ground
4
+5 Volts DC
5
+5 Volts DC
5
PC Clock
6
No Connect
5-pin Female
6-pin Female
6-pin Male
Coil Cable
1
3
4
5
2
2 1
3
5
4
6
5-pin Male
Adapter Cable Connectors
3
1
5
4
2
1 2
4
6
3
5