Pb solder, Product safety notice, Introduction – MITSUBISHI ELECTRIC V29 User Manual
Page 5
MODELS: WD-52627 / 52628 / 62627 / 62628 / 62827 / 62927 / 73727 / 73827 / 73927
Page 5
This service manual includes:
1. Assembly and disassembly instructions for the front and rear cabinet components.
2. Servicing of the Lenticular Screen and Fresnel Lens.
3. Servicing down to major components, chassis, PWBs, Light Engine, Lamp Ballast, etc..
4. Electrical adjustments.
5. Optical Adjustments.
6. Lead Free Soldering.
7. Chip parts replacement procedures.
8. Simplified circuit path diagrams.
The parts list section of this service manual includes:
1. Cabinet and screen parts.
2. Electrical parts.
Block diagrams of the above listed models are included in this service manual for better understanding of the circuitry.
PRODUCT SAFETY NOTICE
Many electrical and mechanical parts in television receivers have special safety related characteristics. These charac-
teristics are often not evident from visual inspection nor can the protection afforded by them necessarily be obtained by
using replacement components rated for higher voltage, wattage, etc.
Replacement parts which have special safety characteristics are identified in this service manual.
Electrical components having such features are identified by shading on the schematic diagram and by bold type in
the parts list of this service manual. Therefore, the replacement for any safety part should be identical in value
and characteristics.
Pb Solder
The PWBs used in the V29, V30, V30+ and V31 chassis are constructed using Lead-Free solder.
When servicing use only recommended Lead-Free solder (refer to page 45).
CableCARD is a trademark of Cable Television Laboratories, Inc.
TV Guide On Screen is a registered trademark of Gemstar Development Corp.
HDMI is a trademark of HDMI Licensing, LLC.
Digital Light Processing, Digital Micromirror Device and DLP are trademarks of Texas Instruments.
MODEL
CHASSIS
HEIGHT
WIDTH
DEPTH
WEIGHT
POWER
USAGE
WD-52627
V29
34 in.
49.6 in.
18.6 in.
121 lbs.
295W
WD-52628
V30
"
"
"
"
"
WD-62627
V29
40.5 in.
58.3 in.
20.3 in
133 lbs.
"
WD-62628
V30
"
"
"
"
"
WD-62827
V30+
"
60.3 in.
"
"
310W
WD-62927
V31
"
"
"
"
330W
WD-73727
V30
44.8 in.
69.9 in.
21.5 in.
165 lbs.
335W
WD-73827
V30+
"
"
"
"
350W
WD-73927
V31
"
69.8 in.
"
"
"
Dimensions/Weight
INTRODUCTION
This service manual provides service instructions for DLP Projection TV Models and Chassis: