MITSUBISHI ELECTRIC V29 - Manual (Page 26)

MODELS: WD-52627 / 52628 / 62627 / 62628 / 62827 / 62927 / 73727 / 73827 / 73927
Page 26
OPERATING CHASSIS OUTSIDE OF CABINET
1) Remove screws from back terminal board.
Screws A = (7), B = (2), C = (2) 2) Remove support bracket screws D = (4), and
mounting screw E = (1)
4) Remove mounting screw F = (1) on right side
of chassis behind bracket
5) Disconnect AC cord from connector PS and
disconnect connector CE1
F
3) Support bracket has latch that must be opened
before removing from unit
latch
support bracket
6) Pull chassis from cabinet. Rotate to side as
pictured below and remove screws G = (2)
PS
CE1
G
D
E
A
B
C