Mobility Electronics NP644 - Manual (Page 19)

NP644 IEEE 802.11g Wireless Network USB Adaptor 19
YML787 Rev1
Field Description
● Ad-Hoc – to establish peer-to-peer wireless communication
directly with other wireless client devices such as other
computers with wireless cards.
Ad-Hoc Band: There are three bands available for selection- 11B, 11G and 11G
Turbo. Choice depends on the type of wireless equipment you
wish to connect to. Check the documentation of the associated
equipment to verify details.
Channel: The channel value that the PCI card will operate in. Australian
Users should select the Channel Range 1-13 and all stations
on the WLAN need to be on the same channel if they are to
communicate.
Tx Rate: Select the data rate for data transmission.
Power Mode: There are 3 modes to choose from:
● Continuous Access Mode (default) – the USB Adaptor is
constantly operating with full power and it consumes the most
power.
● Maximum Power Save – theUSB Adaptor consumes the
least power and only operates when there is wireless network
activity.
● Power Save – the USB Adaptor consumes a moderate level of
power.